Dynamometers

A dynamometer is a tool that, from changes in the elasticity of a spring with a certain calibration, allows to calculate the weight of a body or to measure a force. This device was invented by Sir Isaac Newton (1643–1727) from Hooke's law, taking the limits of measurement through the abilit...

A dynamometer is a tool that, from changes in the elasticity of a spring with a certain calibration, allows to calculate the weight of a body or to measure a force.

This device was invented by Sir Isaac Newton (1643–1727) from Hooke's law, taking the limits of measurement through the ability of a spring to stretch.

With the spring sheltered inside a cylinder, the dynamometer usually has a pair of hooks (one at each of its tips). In the hollow type cylinder that is located around the spring, on the other hand, the scale with the corresponding units appears. When a force is applied to the hook on the outer side, the cursor of that end moves over the scale and points to the value.

The dynamometer can have a specific design according to its application. This instrument can be used to weigh a thing and know its mass. In this case, the dynamometer must be calibrated each time it is moved to changes in the link between mass and weight.

Stressed materials can also be measured through dynamometersto find out how much they deform. Even in the field of orthodontics, dynamometerscan be used to establish what forces are applied in the treatment.

It is worth mentioning that the scale on which this measurement is made is indicated in Units of force and the operation is quite simple. By hooking two weights or performing a force on the outer hook, the needle on that side moves towards the outer scale and signals the value of the force that has been exerted.

Its operation is related to the third law of physics exposed by Newton that says that every action corresponds to a reaction; therefore, whenever two bodies A and B interact, with body A experiencing a force either by contact, magnetic or gravitational interaction, body B will experience at the same time a force of similar magnitude, but in the opposite direction.

The dynamometer can have various uses, here are some of them:

* Measure the weight of an object and also be able to obtain its mass. In this case, each time it is used, the dynamometer must be calibrated again because the relationship between mass and weight varies according to the element to be weighed;

* Apply in the testing machines of a laboratory. To measure specimens or the deformation thereof in a tensile test or the penetration of a hardness test;

* Measure forces applied during a specialized treatment, used mainly in orthodontics.

One of their fundamental characteristics is that they have measurement ranges ranging from a few Newtons to hundreds of kilonewtons.

There are two types of dynamometers:mechanical or electronic. The former are the most used because they are estimated to be the most accurate, presenting a maximum deviation of ± 0.3% of the load. For example, dynamometersavailable for sale in novaut are suitable for solving practical issues without requiring electric current. They are recommended especially for environments where there may be sparks or places where it is necessary to ensure safety.

Differences between dynamometers and balance

It is important to distinguish between the dynamometer,which measures forces, and the balance, which measures masses. In any case, some objects that are known as scales are, in fact, dynamometers, since they work by means of springs that extend or compress. That is the case of the kitchen scale that is used to weigh food.

To explain this more clearly, the dynamometer measures the weight of a body, which means that it marks the force with which the object is attracted by the gravity field, while the balance measures the mass, that is, the amount of matter contained in that body. That is, if you took both measuring objects to the top of a mountain or to the moon, the measurement marked by the dynamometer would differ in one place and another, while that of the balance, no.

Diameter PCE-PFG 500

PCE-PFG 500

Diameter PCE-PFG 500

This dynamometer is a digital and easy-to-manage device to measure traction and compression forces. The dynamometer offers a sampling...
Product rating:
0 review

Product Data Sheet:

pdf 2319014.pdf

Price:

€665.38 (inc. VAT)
€549.90 (Excl. VAT)
2-3 days
Pressure sensor PCE-PS 420

PCE-PS 420-10

Pressure sensor PCE-PS 420

The pressure sensor PCE-PS 420 can be used everywhere where the pressure is easy to measure. Pressure measured by the pressure sensor is...
Product rating:
0 review

Price:

€309.64 (inc. VAT)
€255.90 (Excl. VAT)
2-3 days
Mooring Adapter  PCE-SJ01

PCE-SJJ01

Mooring Adapter PCE-SJ01

Blend adapter for voltage tests- Max capacity: 5 kN- Max. aperture: 16 mm- Connection threaded: M10
Product rating:
0 review

Price:

€108.78 (inc. VAT)
€89.90 (Excl. VAT)
2-3 days
Mooring Adapter PCE-SJJ010

PCE-SJJ010

Mooring Adapter PCE-SJJ010

Mooring Adapter for Traction Tests- Max capacity: 500 N- Max. aperture: 3 mm
Product rating:
0 review

Price:

€210.42 (inc. VAT)
€173.90 (Excl. VAT)
2-3 days
Mooring Adapter PCE-SJJ020

PCE-SJJ020

Mooring Adapter PCE-SJJ020

Mooring Adapter- Max capacity: 500 N
Product rating:
0 review

Price:

€210.42 (inc. VAT)
€173.90 (Excl. VAT)
2-3 days
Mooring Adapter PCE-SJJ029

PCE-SJJ029

Mooring Adapter PCE-SJJ029

Mooring Adapter- Max capacity: 500 N
Product rating:
0 review

Price:

€210.42 (inc. VAT)
€173.90 (Excl. VAT)
2-3 days
Suction device PCE-SJJ031 Suction device PCE-SJJ031

PCE-SJJ031

Suction device PCE-SJJ031

Clamping device for voltage tests, fracture measurement.- Capacity 0.5 kN
Product rating:
0 review

Price:

€1,004.18 (inc. VAT)
€829.90 (Excl. VAT)
2-3 days
Adapter PCE-SJJ032 Adapter PCE-SJJ032

PCE-SJJ032

Adapter PCE-SJJ032

Adapter- Max capacity: 500 N
Product rating:
0 review

Price:

€210.42 (inc. VAT)
€173.90 (Excl. VAT)
2-3 days
Adapter ring PCE-SJJ035 Adapter ring PCE-SJJ035

PCE-SJJ035

Adapter ring PCE-SJJ035

Mordity of subjection- Max capacity: 500 N- Max. aperture: 37 mm
Product rating:
0 review

Price:

€186.22 (inc. VAT)
€153.90 (Excl. VAT)
2-3 days
Tension Mood Adapter PCE-SJ07

PCE-SJJ07

Tension Mood Adapter PCE-SJ07

Traction test adapter in electronic parts, cables, etc.- Max capacity: 500 N- Max. aperture: 2.5 mm
Product rating:
0 review

Price:

€186.22 (inc. VAT)
€153.90 (Excl. VAT)
2-3 days
Mooring Adapter PCE-SJ08

PCE-SJJ08

Mooring Adapter PCE-SJ08

Mooring Adapter for Traction Tests- Max capacity: 1000 N- Max opening: 20 mm
Product rating:
0 review

Price:

€194.69 (inc. VAT)
€160.90 (Excl. VAT)
2-3 days
Adapter PCE-SJ09

PCE-SJJ09

Adapter PCE-SJ09

Traction and pressure test adapter- Max capacity: 5 kN- Connection threaded: M10
Product rating:
0 review

Price:

€210.42 (inc. VAT)
€173.90 (Excl. VAT)
2-3 days
Roasted adapter PCE-SJM10M6

PCE-SJJM10M6

Roasted adapter PCE-SJM10M6

Rosted adapter for dynamometer connection with series bites PCE-SJJ.- Dried connection: M10 to M6- External thread: M10- Internal thread: M6
Product rating:
0 review

Price:

€16.82 (inc. VAT)
€13.90 (Excl. VAT)
2-3 days
Diameter PCE-VTS 50-DFG N 500-KIT incl. test machine Diameter PCE-VTS 50-DFG N 500-KIT incl. test machine

PCE-VTS 50-DFG N 500-KIT

Diameter PCE-VTS 50-DFG N 500-KIT incl. test machine

Digital dynamometer to measure the traction and compression force up to 500 N. It is a precise digital dynamometer with a resolution of...
Product rating:
0 review

Product Data Sheet:

pdf 2318893.pdf

Price:

€3,009.15 (inc. VAT)
€2,486.90 (Excl. VAT)
2-3 days
Diameter PCE-VTS 50-PFG 500-KIT incl. rehearsal machine Diameter PCE-VTS 50-PFG 500-KIT incl. rehearsal machine

PCE-VTS 50-PFG 500-KIT

Diameter PCE-VTS 50-PFG 500-KIT incl. rehearsal machine

This dynamometer is a digital and easy-to-manage device to measure traction and compression forces. The dynamometer offers a sampling...
Product rating:
0 review

Product Data Sheet:

pdf 2319018.pdf

Price:

€2,464.65 (inc. VAT)
€2,036.90 (Excl. VAT)
2-3 days
Up
Menu
Close
Shopping trolley
Close
Return
Account
Close