SH2ROAC224 Carlo Gavazzi

SH2ROAC224, AC Motor Control for Blind/Window Model SH2ROAC224., SH2ROAC224, It is a relay output module for controlling blind/window AC motors. It is designed for connection and control through smart-house system controllers. The shutter/window motor is controlled through two relays in series: one of them serves for the activation / deactivation of the motor and the other serves to control the direction of up / down. These two relays are controlled in such a way that the timing of the motor is respected before reversing the direction of the motor., SH2ROAC224, The pushbutton serves to activate / deactivate the output, without the need to connect the bus for testing. The command from the pushbutton will only be detected if it is held down for more than 1 second; the two outputs will be activated during the entire time interval in which the button is pressed. Once the button has been released, the outputs will be deactivated. Each time the button is pressed, the direction of the motors will change, always respecting the reversal delay interval. The blind/window module is controlled via the SH2WEB24 controller for the movement of blinds, windows, blinds or curtains. Receive the upload or download order from sh2WEB24, and then activate the corresponding output. The two outputs are individually controlled and can be managed with different shutter functions. The upload/drop output remains active for a time known as "runtime" or until another upload/download order is received. Before reversing the movement, the output will remain disabled for a time known as "reversal delay". The SH2WEB24 sends the reversal delay intervals to the SH2ROAC224 and they may be different for each output. The runtime is controlled through the controller. If the tilt function is enabled, the SH2ROAC224 will be activated to manage the tilt order received from the SH2WEB24. The tilt order can be of two types: tilt up and tilt down. Once this order is received, the SH2ROAC224 will activate the up or down output for the tilt interval, always respecting the reversal delay interval. Encoding/Addressing No addressing is required, as the module is equipped with a specific identification number (SIN). The user only has to enter the SIN number in the configuration tool when creating the system configuration. See the table below for the channels used according to the function(s) configured in the Sx2WEB24 controller.