Produits connexes
DRP-24V240W1CAN DELTA
DRP-24V240W1CAN
Fiche technique
- Output Current
- 10A
- Output Voltage
- 24V
- Output Power
- 240W
- Line Regulation
- 0.5% (@ 88-264Vac input, 100% load)
- Load Regulation
- 1% (@ 88-264Vac input, 0-100% load)
- Start-up Time
- 1,000ms Max. @ 24V, 10A
- Nominal Input Voltage
- 100-240Vac
- Input Voltage Range
- 88-264Vac
- Nominal Input Frequency
- 50-60Hz
- Input Frequency Range
- 47-63Hz
- Input Current
- 2.27A Typ. @ 115 Vac, 1.19A Typ. @ 230Vac
- Efficiency at 100% load
- 92.70% Typ. @ 115Vac, 94.48% Typ. @ 230Vac
- Case Chassis / Cover
- Aluminium
- Operating Temperature
- -25°C to +70°C (Cold Start -40°C)
- Storage Temperature
- -40°C to +85°C
- Operating Humidity
- 5 to 95% RH (Non-Condensing)
- Shock Test (Non-Operating)
- IEC 60068-2-27, Half Sine Wave: 30G for a duration of 18ms; 3 times per direction, 9 times in total
- Vibration (Non-Operating)
- IEC 60068-2-6, Sine Wave: 10-500Hz; 3G peak; displacement of 0.35mm; 60 min per axis for all X, Y, Z directions
- Operating Altitude
- 0 to 5,000 Meters (16,400 ft.)
- Overvoltage
- 28.8 - 35.2V, SELV Output, Hiccup Mode, Non-Latching (Auto-Recovery)
- Overload / Overcurrent
- 125 170% of rated load current, Constant current, Hiccup Mode (Auto-Recovery)
- Degree of Protection
- IP20
- Protection Against Shock
- Class I with Primary Earth connection
- CE
- In conformance with EMC Directive 2014/30/EU and Low Voltage Directive 2014/35/EU
- UKCA
- In conformance with Electrical Equipment (Safety) Regulations 2016 No. 1011 and The Electromagnetic Compatibility Regulations 2016 No. 1091
- Harmonic Current Emissions
- IEC/EN/BS EN 61000-3-2, Class A
- PARD
- 100mVpp Max.
- Rise Time
- 60ms Max. @ 24V, 10A
- Power Factor at 100% load
- 0.99 Typ. @ 115Vac, 0.93 Typ. @ 230Vac, 0.99 Min. @ 115Vac, 0.93 Min. @ 230Vac
- Cooling System
- Convection
- Immunity
- Generic Standards: EN/BS EN 55024, EN/BS EN 61000-6-2
- Voltage Fluctuation and Flicker
- IEC/EN/BS EN 61000-3-3
- Indicator
- Green LED (DC OK)
- Input Terminal
- 3 Pins (Rated 600V/35A)
- Output Terminal
- 4 Pins (Rated 300V/28A)
- Output Voltage Adjustment Range
- 24-28Vdc
- Start-up with Capacitive Loads
- 10,000µF
- Signal Terminal
- 2 Pins (Rated 300V/28A)
- Mounting Rail
- Standard TS35 DIN Rail in accordance with EN 60715
- Pollution Degree
- 2
- Industrial Control Equipment
- UL/cUL listed: UL 508 and CSA C22.2 No. 107.1-01 (File No. E315355)
- Safety Entry Low Voltage
- SELV (IEC 60950-1)
- Component Power Supply for General Use
- EN/BS EN 61204-3
- Bump Test (Operating)
- IEC 60068-2-29, Half Sine Wave: 10G for a duration of 11ms, 1,000 times per direction, 6,000 times in total
- Electrical Equipments of Machines
- EN/BS EN 60204-1 (over voltage category III)
- Electrical Equipment for Use in Electrical Power Installations
- IEC/EN/BS EN 62477-1 / IEC 62103
- Power Boost Duration
- 5 seconds Min.
- Power Boost Recovery Time
- 18 seconds Typ.
Références spécifiques
Nouveau produit
Télécharger
Datasheet-DRP-24V240W1CAN.pdfAucun avis client pour le moment.
