G50101106 Carlo Gavazzi

G50101106, Transmitter for Digital Signals with LED Confirmation Model G 5010 1106, G50101106, Dupline Powered Single Channel Transmitter in Mini E Box with Contact Input. Especially suitable for places where no power supply is available. The input incorporates a pulse extension to ensure the transmission of short input pulses. When the input is activated, a brief pulse of charging current ensures that the contact is maintained. The front red LED can be encoded for any Dupline channel address to indicate the activated channel status. The module has only 4 terminals: 2 for Dupline and 2 for input., G50101106, 1 channel transmitter powered by the Dupline with contact input. The input has a built-in pulse extension to ensure the transmission of even brief input pulses. The front red LED of the module can be encoded to indicate the status of any Dupline channel. The LED input and output can be encoded separately using the GAP 1605 encoding programmer. For more information see the corresponding technical data sheet. Note that a special cable (GAP-TPH-CAB) is needed to connect the GAP 1605 to the programming connector behind the G 5010 1106's faceplate. The channel direction for the input is selected in I/O-1 on the GAP 1605 and the channel direction for the LED output on I/O-5. If a channel is assigned to I/O-3 or I/O-4, these channels will be permanently activated.