BACC-KEYPAD-DC-U CARLO GAVAZZI

BACC-KEYPAD-DC-U, Smart Dupline Keyboard Model BACC-KEYPAD-DC-U, BACC-KEYPAD-DC-U, This keyboard can be used to control different events of the building; e.g. arming/disarming alarm with zone alarm, doorbell, appliance control, etc. It is part of the "smart-house" concept and can be used with all the functions supported by the smart-house controller., BACC-KEYPAD-DC-U, The keyboard is fully programmable. The user operates the keyboard by pressing the keys from 0 to 9, the pad (#) and the bell symbol (). It is possible to select different codes for different users, and it is also possible to add, modify and delete codes. The LEDs serve to indicate the different signals when the keyboard is operated, and the red and green LEDs can also be controlled with the smart-house bus. By changing the settings, it is possible to adjust the behavior of the LEDs to other combinations. For a summary, see the user manual. The buzzer sounds when a key is pressed and also emits a signal when other keyboard events happen; e.g. entering a correct code, entering an incorrect code, etc. The buzzer can also be accessed via the smart-house bus. B A C C - K E Y PA D - D C - U connected to sh2WEB24 Encoding/Addressing If the keyboard is connected to the SH2WEB24 controller, no addressing is required, as the module is equipped with a specific identification number (SIN). The user only has to enter the SIN number in the SH tool when creating the system configuration. Red and green LEDs are also configurable via the SH tool; the user can associate it with any function as an informative LED. The configuration is carried out by entering new values on the keyboard, either directly or after having disconnected the power from the unit (selectable). B A C C - K E Y PA D - D C - U connected to the BH8-CTRLX230 Encoding/Addressing Not possible - precoded in 5 fixed directions.