BDD-INCON4-U Carlo Gavazzi

BDD-INCON4-U, Smart Dupline Input Module Model BDD-INCON4-U, BDD-INCON4-U, The BDD-INCON4 is an input module that must be connected to potential-free outputs or NPN transistor outputs. It facilitates a flexible concept of installation and connection to other devices (e.g. alarm assembly device) in building automation installations. It is part of the "smarthouse" concept and can be used with all the functions supported by the smart-house controller., BDD-INCON4-U, The BDD-INCON4 is fully programmable through the tool; each input can be individually associated with one or more functions supported by the smart-house system. BDD-INCON4 connected to SH2WEB24 Encoding/Addressing If the input module is connected to the SH2WEB24 controller, no addressing is required, as the module is equipped with a specific identification number (SIN). The user only has to enter the SIN number in the configuration tool when creating the system configuration. The red LED is also configurable via the SH tool; the user can associate it with any function as an informative LED. BDD-INCON4-U connected to the BH8-CTRLX-230 Encoding/Addressing If the input module is connected to the BH8-CTRLX-230 controller, the user must program the Dupline channels® using the BGPCOD-BAT; this module has 4 input channels and 1 output channel (red LED). LED Indication The three LEDs light up only if the input module receives external power. Green LED: Power status On: Connected power Off: Disconnected power Yellow LED: Dupline status® On: Dupline bus® connected Off: Dupline bus® not connected or defective red LED: informative LED Programmable by the user.