DRL-24V240W1AA
Ficha técnica
- Output Current
- 10A
- Output Voltage
- 24V
- Output Power
- 240W
- Start-up Time
- 1000ms typ.@ 115Vac & 230Vac (100% load)
- Dynamic Response (Overshoot and Undershoot O/P Voltage)
- ± 10% (2400mVpp) @ 85-264Vac input, 0-50% load, 50-100% load (Slew Rate: 0.1A/µs)
- Nominal Input Voltage
- 100-240Vac
- Input Voltage Range
- 85-264Vac
- Nominal Input Frequency
- 50-60Hz
- Input Frequency Range
- 47-63Hz
- Input Current
- 2.8A typ.@115Vac, 1.4A typ.@ 230Vac
- Efficiency at 100% load
- 88.0%typ.@115Vac, 90.0% typ.@ 230Vac
- Case Chassis / Cover
- SGCC / Aluminium
- Operating Temperature
- -20°C to +70°C
- Storage Temperature
- -40°C to +85°C
- Operating Humidity
- 5 to 95% RH (Non-Condensing)
- Shock Test (Non-Operating)
- IEC 60068-2-27, 27, Half Sine Wave: 50G for duration of 11ms; 3 times per direction, 9 times in total
- Vibration (Non-Operating)
- IEC 60068-2-6, Random: 5Hz to 500Hz; 2.09Grms; 20 min per axis for all X, Y, Z directions
- Operating Altitude
- 0 to 5,000 Meters (16,400 ft.)
- Overvoltage
- 28.8V-35.2V, SELV Output, Latch Mode
- Overload / Overcurrent
- 105-150% of rated load current, Continuous current
- Over Temperature
- Latch Mode
- Short Circuit
- Hiccup Mode, Non-Latching (Auto-Recovery when the fault is removed)
- Degree of Protection
- IP20
- Protection Against Shock
- Class I with Primary Earth connection
- CE
- In conformance with EMC Directive 2014/30/EU and Low Voltage Directive 2014/35/EU
- UKCA
- In conformance with Electrical Equipment (Safety) Regulations 2016 and Electromagnetic Compatibility Regulations 2016
- Harmonic Current Emissions
- IEC/EN/BS EN 61000-3-2, Class A; GB17625.1
- Rise Time
- 100ms typ. @ nominal input (100% load)
- Cooling System
- Convection
- Expected Cap Life Time
- 10 years (115Vac & 230Vac, 50% load @ 40°C)
- Immunity
- Generic Standards: EN/BS EN 61000-6-1, EN/BS EN 61000-6-2, EN/BS EN 55024
- Voltage Fluctuation and Flicker
- IEC/EN/BS EN 61000-3-3
- Inrush Current
- 20A typ.@115Vac, 40A typ.@ 230Vac
- Indicator
- Green LED (DC OK)
- Input Terminal
- 3 Pins (Rated 600V/35A)
- Output Terminal
- 6 Pins (Rated 300V/28A)
- Output Voltage Adjustment Range
- 22-28Vdc
- DC Input Voltage Range
- 120-375Vdc
- Start-up with Capacitive Loads
- 8,000µF Max
- Signal Terminal
- 6 Pins (Rated 300V/28A)
- Mounting Rail
- Standard TS35 DIN Rail in accordance with EN 60715
- Vibration (Operating)
- IEC 60068-2-6, Sine Wave: 10Hz to 500Hz @ 19.6m/s² (2G peak); displacement of 0.35mm; 10 min per cycle, 60 min for X direction
- Shock Test (Operating)
- IEC 60068-2-27, 27, Half Sine Wave: 10G for duration of 11ms; 1 time for X direction
- Pollution Degree
- 2
- Industrial Control Equipment
- UL/cUL listed: UL 508 and CSA C22.2 No. 107.1-01 (File No. E338991)
- Safety Entry Low Voltage
- SELV
- Component Power Supply for General Use
- EN/BS EN 61204-3
Nuevo
No customer reviews for the moment.