RGC2A22A25KKE Carlo Gavazzi

RGC2A22A25KKE, Three-phase solid state relays with integrated heatsink., RGC2A22A25KKE, This series replaces electromechanical contactors especially when switching is frequent. It is available in boxes from 54 mm wide (3 DIN modules) to 70 mm, for two or three phase switching. The RGC series is suitable for switching resistive loads, slightly inductive loads and motors. A green LED indicates the presence of the control voltage. The operation of the fan is controlled internally in the versions that integrate it. Detection of static relay overheating, network loss, malfunction and pressure loss is possible with the RGC version. M. It has an electromechanical relay alarm output for remote indication. Another additional feature offered by the RGC series. M is the electronic auxiliary output, in addition to LED indicators for charge status and alarm status indication., RGC2A22A25KKE, Pressure loss detection is possible only with active control voltage. This alarm is triggered in the absence of an open load or load termination at terminals T1, T2 and/or T3 for more than 120 ms. When the pressure loss alarm is activated, the static relay output will not be disconnected as long as the control voltage is present in RGC. M. The failure condition is automatically reset as soon as the fault is fixed. RGC.. M allows a combined total imbalance in load and feed of up to 40%, with a load imbalance of a maximum of 40% and with a feed imbalance of a maximum of 15%. If these limits are exceeded, anomalous behavior and false alarms can occur.