SH2RE16A2E230 Carlo Gavazzi

SH2RE16A2E230, Relay Output with Energy Measurement Model SH2RE16A2E230., SH2RE16A2E230, It is a two-relay output module for DIN rail mounting with energy measurement. Single-phase variables: VLN, A and W. Energy measurements: total kWh. The measured values are recorded in the SH2WEB24. Outputs are usually disabled. When the Dupline® bus receives an activation order, the output is activated and remains activated until the deactivation order is received., SH2RE16A2E230, Operating Mode If the SH2RE16A2E230 is connected to the Dupline bus® and the bus is working properly, the relay module will be in STANDARD mode and the green LED will be activated. The relay accesses LoCAL mode if the button is pressed or if the bus fails or is not connected. In LoCAL mode, the relay does not support any bus command and the LED will flash. The relay can return to STANDARD mode only when the bus status is correct and one of the following events occurs: 1) Immediately after the return of the Dupline bus® 2) After a time limit of 1 minute after pressing a button 3) After restarting the power. Pushbutton The pushbutton is used to activate/deactivate the outputs, without the need to connect the bus for testing.