Productos relacionados
DRM-24V240W1PN DELTA
DRM-24V240W1PN
Ficha técnica
- Output Current
- 10A
- Output Voltage
- 24V
- Output Power
- 240W
- Nominal Input Voltage
- 100-240Vac
- Input Voltage Range
- 85-276Vac
- Nominal Input Frequency
- 50-60Hz
- Input Frequency Range
- 47-63Hz
- Input Current
- 10.0A Max. @ 100Vac & 120Vac & 230Vac
- Efficiency at 100% load
- 92.64% Typ. @ 100Vac, 93.44% Typ. @ 120Vac, 94.84% Typ. @ 230Vac
- Inrush Current
- 10.0A Max. @ 100Vac & 120Vac & 230Vac
- Power Factor at 100% load
- 0.99 Typ. @ 100Vac, 0.98 Typ. @ 120Vac, 0.95 Typ. @ 230Vac
- Case Chassis / Cover
- Aluminium
- Cooling System
- Convection
- Input Terminal
- 3 Pins (Rated 600V/35A)
- Output Terminal
- 6 Pins (Rated 300V/28A)
- Operating Temperature
- -25°C to +70°C (Cold start -40°C)
- Storage Temperature
- -40°C to +85°C
- Operating Humidity
- 5 to 95% RH (Non-Condensing)
- Vibration (Non-Operating)
- IEC 60068-2-6, Sine Wave: 10-500Hz; 3G peak; displacement of 0.35mm; 60 min per axis for all X, Y, Z directions
- Degree of Protection
- IP20
- CE
- In conformance with EMC Directive 2014/30/EU and Low Voltage Directive 2014/35/EU
- UKCA
- In conformance with Electrical Equipment (Safety) Regulations 2016 No. 1011 and The Electromagnetic Compatibility Regulations 2016 No. 1091
- Harmonic Current Emissions
- IEC/EN/BS EN 61000-3-2, Class A
- Voltage Fluctuation and Flicker
- IEC/EN/BS EN 61000-3-3
- Line Regulation
- 10mV Max. (@ 85-276Vac input, 100% load)
- Load Regulation
- 100mV Max. (@ 85-276Vac input, 0-100% load)
- Hold-up Time
- 46ms Typ. @ 100Vac & 120Vac & 230Vac (100% load)
- Shock Test (Non-Operating)
- IEC60068-2-27, Half Sine Wave: 30G for a duration of 18ms; 3 times per direction, 6 times in total
- Short Circuit
- Hiccup Mode, Non-Latching (Auto-recovery when the fault is removed)
- Protection Against Shock
- Class I with Primary Earth connection
- Output Voltage Adjustment Range
- 24-28Vdc
- Start-up with Capacitive Loads
- 10,000µF Max.
- Safety Entry Low Voltage
- SELV (IEC 60950-1)
- Immunity
- Generic Standards: EN/BS EN 55024, KN 35, EN/BS EN 61000-6-2
- PARD
- 50mVpp Max.
- DC Input Voltage Range
- 88-375Vdc
- Indicator
- Green LED (DC OK) and Red LED (Overload)
- Pollution Degree
- 2
- Component Power Supply for General Use
- EN/BS EN 61204-3
- Power Boost Recovery Time
- 14 seconds Typ.
- Mounting Rail
- Standard TS35 DIN Rail in accordance with EN 60715
- Bump Test (Operating)
- IEC 60068-2-29, Half Sine Wave: 10G for a duration of 11ms, 1,000 times per direction, 6,000 times in total
- Electrical Equipments of Machines
- EN/BS EN 60204-1 (over voltage category III)
- Electrical Equipment for Use in Electrical Power Installations
- IEC/EN/BS EN 62477-1 / IEC 62103
- Nominal DC Input Voltage
- 110-300Vdc
Referencias específicas
Nuevo
Descargas
Datasheet-DRM-24V240W1PN.pdfNo customer reviews for the moment.
