SPUBC24120 Carlo Gavazzi

SPUBC24120, Smart Power Supply and UPS Model SPUBC 24V 5A, SPUBC24120, SPUBC CARLO GAVAZZI allows you to manage power and power management requirements, in the most efficient way, between charge and battery. The maximum current available for battery charging is set by means of a front attenuator. It can range from 20% to 100%, which means it is possible to charge with up to 5A. However, the priority is always the load. If charging requires 80% of the current, the current available for the battery is only the remaining 20%, regardless of the configuration. In the SPUBC24120, the rated output current is 5A, even if the battery is charged, the power supply can provide 10A. SPUBC implements a comprehensive process called "battery care", which applies algorithms to obtain fast and automatic charging, optimization of battery charge over time, flat battery recovery and real-time diagnostics during installation and operation. The real-time self-diagnostic system monitors battery failures, such as sulfation, short-circuit elements, accidental reverse polarity connection, and battery disconnection or poor connection. All can be easily detected and removed during installation and operation, using the "Diagnostic LED" flash code. Continuous monitoring of battery efficiency, reduces the risk of damage to the battery and allows safe operation in permanent connection. This device is suitable for a selection of the most common battery types. Using integrated bridges, pre-set curves can be activated. They are programmed for two levels of charging, fast and slow/floating, but the user can program them for a single level of charging. In addition to the SPUBC, CARLO GAVAZZI also provides a selection of racks (Racks) for DIN rail mounting of the battery, with the battery included on request, from 1.2 Ah to 12 Ah, capable of providing, depending on the charge, from a few minutes to several hours of charge reserve., SPUBC24120, Single-phase input 115Vca / 230Vca / 277Vca. Intelligent power management. Nominal output 5A with 10A overload. Max 5A battery charging current. Suitable for open or sealed acid-poise or gel-lead batteries. Automatic battery diagnostics and battery care. Fast, slow/floating and recovery charging cycles. Reverse battery polarity, short circuit or. battery disconnection. 2 relay outputs for remote indication of status and operation. Accredited by UL and CE.