PD180CBT30MU Carlo Gavazzi

PD180CBT30MU, Barrier Photocells, Relay Output, Battery Power Model PD180CBT30Q/MU,, PD180CBT30MU, The PD180CBT30Q/MU sensor is specially designed for the industrial and private door market. The sensor complies with the new regulations for motorized doors in Europe and North America. The compact polycarbonate box allows flexible installation as the lenses are adjustable horizontally and vertically. The sensor is easy to use and does not require any sensitivity adjustment. The spherical design of the lens is superior to previous sensor designs with built-in parabolic reflectors that presented corrosion and dust problems. Increased safety by incorporating: - Sensor test function: The emitter has a built-in test input designed to inhibit the emitter and thus evaluate the operation of the sensor. The test function is activated by the door controller or the door function can be activated with a stroke end, magnetic sensor or safety edge. The receiver is powered by 12 to 24 WLV/DC and the transmitter uses two lithium batteries of ER14505 3.6 VDC Size AA,, PD180CBT30MU, The cable must be positioned downwards to prevent water from entering the sensor (see Dimensions). This product can only be used to detect direct interruption between Tx and Rx. Sensors must be installed on a surface not exposed to strong vibrations. To obtain an "ESPE type 2" safety device, the sensors must be connected to a control system equipped with a mute function test or similar sensor verification function.