Related products
The hardness tester has been developed to measure hardness in metallic materials. The durometer measures hardness in the Vickers, Brinell, Rockwell, Leeb, and Shore units. The measurement method of the durometer is the Leeb rebound principle. It integrates a backlit color display. The durometer keys are also backlit. The firing pin is connected to the durometer by means of a cable. The durometer has a memory of 6 groups of 100 values each. You can transfer the measured values to a PC via the USB interface and WiFi. It is powered by conventional 1.5 V AA batteries, with an operating time of approximately 50 hours.
- USB and WiFi data transfer
- Large backlit LCD display
- Wide measuring range
- Ability to measure in any position
- Hardness units: HRC, HRB, HV, HB, HS
- Suitable for measuring on metal bases
Hardness tester PCE-2900 | |
Technical Specifications | |
Rank | 170 ... 960 HLD |
Reproducibility | ±6 HLD |
Hammer | Type D |
Measuring Direction | 360° |
Units | Leeb, Brinell, Rockwell A, Rockwell B, Rockwell C, Vickers, Shore |
Roughness of the test piece in Ra | 2 μm |
Minimum weight of the test piece | Direct measurement: 5 kg Measurement on clamped workpiece: 2 ... 5 kg With coupling gel: 0.05 ... 2 kg |
Minimum thickness of the test piece | Direct measurement: > 5mm With coupling gel: 0.8 ... 5 mm |
Screen | Color LCD |
Internal Memory | 600 values (divided into 6 groups) |
Interface | USB, WiFi |
Feeding | 2 x 1.5V batteries, type AA |
Operating Time | Approx. 50 hours |
Operating Conditions | 10 ... 50 °C / max. 90 % H.r. |
Storage conditions | -30 ... 60 °C / max. 90 % H.r. |
Dimensions | 160 x 80 x 35 mm |
Weight | 350 g |
What's in the Shipment 1 x Hardness Tester PCE-2900 1 x Hammer D 1 x Calibration Block 2 x 1.5V batteries, type AA 1 x Instruction Manual 1 x Carrying case |
No customer reviews for the moment.