B4X-LS4-U Carlo Gavazzi

B4X-LS4-U, Smart Dupline Aurora Line, Pushbutton Model B4X-LS4-U., B4X-LS4-U, The B4X-LS4-U is a pushbutton with 4 buttons and 4 LED outputs. It is designed for mounting in a box of mechanisms of 44 x 44 of Fuga and NIKO, as well as in all the 44 x XX of Bticino. The pushbutton has two COLORS of LED, white and blue, programmable independently. The pushbutton is part of the "smart-house" concept for building automation applications and can be used for the control of lighting or blinds, as well as for other functions compatible with the smarthouse controller. It is fully programmable through the SH tool, B4X-LS4-U, The B4X-LS4-U is fully programmable through the SH tool. Each pushbutton can be individually associated with one or more of the functions supported by the smart-house system. B4X-LS4-U connected to sh2WEB24 Encoding/Addressing If the pushbutton is connected to the SH2WEB24 controller, it does not require addressing, as the module is equipped with a specific identification number (SIN). The user only has to enter the SIN in the SH tool when creating the system configuration. Channels used: 4 input channels and 4 output channels. LED Programming LEDs are also configurable via the SH tool: •White LEDs. The 4 white LEDs can be individually programmed as a guide light. If the guide light function has been activated and a pushbutton has been associated with a function, the white LED corresponding to that button will be activated if the function is disabled, and will be deactivated if the function is activated. •Blue LEDs: The 4 blue LEDs can be individually programmed as an operating status indication. If there is no Dupline bus® or there is a fault, the LED will be disabled. B4X-LS4-U connected to the BH8-CTRLX-230 Encoding/Addressing If the pushbutton module is connected to the BH8-CTRLX230 controller, the user must program the Dupline® channels using the BGP-COD-BAT; this module has 4 input channels (pushbuttons) and 4 output channels (LED). I/0 1-4: pushbutton 1-4 I/0 5-8: LED 1-4. Programming LED • White LEDs: The 4 white LEDs can all be programmed together as a guide light (they will be activated when the light is off). Bit in case of failure=0: guide light function disabled. Bit in case of failure=1: Guide light function enabled. The factory setting of the bit in case of failure=0. The bit in case of failure must be programmed with the BGPCOD-BAT. •Blue LEDs: The 4 blue LEDs can be individually programmed as an operating status indication. If there is no Dupline bus® or there is a fault, the LED will be disabled. Mechanism box and frame compatible with the Aurora line The Aurora 44x44 light button can be mounted on the frames and mechanism box indicated below: for other models not specified below, CARLO GAVAZZI does not guarantee compatibility. •Niko •Leakage •Bticino: Series Light, Living, Luna (it is necessary to use the transparent adapter). The B4X-LS4-U is compatible with all Bticino 44 x XX cases, adding a Bticino plastic lid.