copy of Sumodrive 510 7G1mm² (5 UNITS)

Info

• Energy chain cables
• Power & Control

Application

ÖPVC CPR cables meet the criteria for classification of construction products according to Regulation CPR 305/2011 and EN 50575, are suitable for use in signaling, control, measurement etc.
Specially designed for machine tool, high flexibility cable.
They can be used in the following applications: Machine Tool, Data Transfer Systems, Electronic Control and Signals.

No flame propagation according to UNE-EN 60332-1-2, EN 60332-1-2 and IEC 60332-1-2.
Good resistance to industrial oils and chemical agents.
Resistance to occasional contact with water.

Regulations | General properties

• UL & CSA Certification for USA and Canada
• UL FT2 Non-flame propagator
• HD 22.10 High resistance to industrial oils and greases
• EN 60754-1 Halogen free
• Other properties
  nGood resistance to acids, alkaline solutions, solvents, hydraulic fluids, etc.
  nResistant to abrasion and cuts
  nOuter shell with low adhesion surface
  nExcellent moisture resistance

Construction

• Flexible electrolytic copper conductor (Class 5) according to UNE-EN 60228, EN 60228 and IEC 60228
• Polyvinyl chloride type TI 2 according to UNE-EN 50363-3 and EN 50363-3
• Driver identification (see at the end of the document)
• Polyvinyl chloride type TM 2 according to UNE 21031-5 and HD 21.5S3
• Grey

Specifications

• Nominal voltage 300/500V
• Test voltage 2.000 V AC
• Maximum temperature 70 °C (160 °C for 5sec. in case of short circuit)
• Minimum bend radius 5 x Outer diameter in fixed installation
• Operating temperature -25 °C to +70 °C

Identification of drivers

• ÖPVC-JZ: Numbered black + yellow/green conductors
• ÖPVC-OZ: Numbered black conductors, without yellow/green
• ÖPVC-JB: Conductors in colors + yellow/green
• ÖPVC-OB: Conductors in colours, without yellow/green