MCBACIPM Carlo Gavazzi

MCBACIPM, Electric Power Management and Control Network Analyzer and Network Quality Model WM40 96, MCBACIPM, Three-phase Power Quality Analyzer with built-in advanced configuration and LCD data display. Especially recommended for measuring the main electrical variables. Modular box for panel mounting with ip65 degree of protection (front). In addition, the meter can incorporate digital outputs, which can be used as pulse outputs, proportional to the measured active and reactive energy, or as alarm outputs. The equipment is provided with front optical communication port, RS485/RS232 communication ports, Ethernet, BACnet-IP, BACnet MS/TP or Profibus DP V0, pulse and alarm outputs 6 digital inputs or analog outputs (20mA and / or 10V) are available on request. Parameter programming and data reading by means of WM3040Soft software., MCBACIPM, Degree of protection (front): IP65, NEMA4x, NEMA12. Front optical communication port (ANSI type 2). 1 RS232 and RS485 port (optional). MODBUS RTU protocol. MODBUS TCP/IP Ethernet port (optional). BACnet -IP port over Ethernet port (optional). MS/TP BACnet port over RS485 port, BTL approved (optional). Ethernet/IP port, ODVA approved (optional). Profibus DP V0 port (upon request). Up to 6 digital outputs for rate selection, "dmd" synchronization, gas/water readings (hot cold) and remote heating reading (optional). Up to 8 static outputs (pulse, alarm, remote control) (optional). Up to 6 relay outputs (pulse, alarm, remote control) (optional). Up to 16 fully configurable alarms with or/AND logic connectable with up to 4 relay outputs or up to 6 static outputs (optional). Up to 4 analog outputs (+20mA, +10VDC) (optional).