In conformance with 2016 No. 1101. The Electrical Equipment (Safety) Regulations 2016 and 2016 No. 1091 The Electromagnetic Compatibility Regulations 2016
Harmonic Current Emissions
IEC/EN 61000-3-2, Class A
Voltage Fluctuation and Flicker
IEC/EN 61000-3-3
Vibration (Operating)
IEC 60068-2-6, Sine Wave: 10-500Hz @ 19.6m/S² (2G peak); 10 min per cycle, 60 min for all X, Y, Z directions
Short Circuit
Hiccup Mode, Non-Latching (Auto-recovery when the fault is removed)
Protection Against Shock
Class II (No Primary Earth connection is required)
Galvanic Isolation
Input to Output: 3.0KVac
Output Voltage Adjustment Range
11.5-14.0Vdc
Start-up with Capacitive Loads
3,000µF Max
Wire
Input/Output: AWG 20-12
Operating Altitude
0 to 2,000 Meters (6,560 ft)
Safety Entry Low Voltage
SELV (EN 60950)
Immunity
Generic Standards: EN 55024
DC Input Voltage Range
125-375Vdc
Indicator
Green LED (DC OK)
Shock Test (Operating)
IEC 60068-2-27, Half Sine Wave: 4G for a duration of 22ms, 3 shocks for each 3 directions, 9 times in total
Pollution Degree
2
Over Voltage Category
II
Mounting Rail
Standard TS35 DIN Rail in accordance with EN 60715