VC12RTM2410M Carlo Gavazzi

VC12RTM2410M, Capacitive Proximity Sensors Level Detector Models VC11RTM24, VC12RTM24, VC12RNM24, VC12RTM2410M, Capacitive level sensor in thermoplastic polyester box for mounting on PG 36 cable presses. Available with adjustable sensing distance and with/without built-in time delay (delay to connection or disconnection). The relay output ensures that the load can be activated directly. Excellent for use in the agricultural sector (detection of grain, liquids, etc.)., VC12RTM2410M, VC11RTM24 (see operating diagram). Power is applied to the sensor (BN and BU cables). When the lens is not present, the relay works (connection between the BK and YE cables) and the LED lights up. When the target is detected, VC12RTM24 is (see operating diagram). Power is applied to the sensor (BN and BU cables) and the time measurement is initiated. Once the adjustment time has elapsed (0-10 min), the relay operates (connection between the BK and YE cables) and VC12RNM24 is maintained (see operating diagram). Power is applied to the sensor (BN and BU cables). The relay works (connection between the BK and YE cables) and starts the time measurement and the LED flashes. Once the adjustment time has elapsed (0-10 min), the relay disconnects (connection between the BK and GY cables) and the LED turns off. The relay is kept disconnected as long as the target has been detected. Ne connected until the target is detected. Once the sensor is activated, the relay is disconnected (connection between the BK and GY cables). As soon as the target is not present again, the adjustment time measurement begins. remains active until the target is detected. Once the sensor is activated, the relay is disconnected (connection between the BK and GY cables).