rutx08000000-teltonika networks
rutx08000000-teltonika networks
rutx08000000-teltonika networks
rutx08000000-teltonika networks
Reseña:

Your inquiry has been sent successfully

There was an error sending your inquiry.

Consulta disponibilidad

RUTX08 TELTONIKA

ROUTER ETHERNET INDUSTRIAL
116,25 € (excl. IVA) 140,66 € (inc. IVA)
Impuestos incluidos
¿Cuántas unidades te gustaría comprar?
¡Envía tu consulta!
RUTX08000000
TELTONIKA NETWORKS
Nuevo
24/48 horas
0,60 Kg
Entregas internacionales / International deliveries
Cantidad:
Novaut no es distribuidor autorizado de TELTONIKA NETWORKS. Este es un producto SURPLUS. La garantía del fabricante original no es aplicable.
 Calcular gastos de envío
Envío gratis
hasta España vía Correos
Entrega estimada: No se especificó entrega estimada días hábiles
Ubicación: Almacén 13

Productos relacionados

RUTX08 TELTONIKA, ETHERNET WAN 1 x WAN port (can be configured as LAN) 10/100/1000 Mbps, compliance with IEEE 802.3, IEEE 802.3u, 802.3az standards, supports auto MDI/MDIX crossover, LAN 3 x LAN ports, 10/100/1000 Mbps, compliance with IEEE 802.3, IEEE 802.3u, 802.3az standards, supports auto MDI/MDIX crossover, NETWORK Routing Static routing, Dynamic routing (BGP, OSPF v2, RIP v1/v2, EIGRP, NHRP), Network protocols TCP, UDP, IPv4, IPv6, ICMP, NTP, DNS, HTTP, HTTPS, FTP, SMTP, SSL v3, TLS, ARP, VRRP, PPP, PPPoE, UPNP, SSH, DHCP, Telnet, SNMP, MQTT, Wake on LAN (WOL), DLNA, VoIP passthrough support H.323 and SIP-alg protocol NAT helpers, allowing proper routing of VoIP packets, Connection monitoring Ping Reboot, Wget reboot, Periodic Reboot, LCP and ICMP for link inspection, Firewall Port forwards, traffic rules, custom rules, DHCP Static and dynamic IP allocation, DHCP Relay, Relayd, QoS / Smart Queue Management (SQM) Traffic priority queuing by source/destination, service, protocol or port, DDNS Supported >25 service providers, others can be configured manually, Network backup VRRP, Hotspot Internal/external Radius server, captive portal, built in customizable landing page, SSHFS (optional) Possibility to mount remote file system via SSH protocol (not available in standard FW), SECURITY Authetication Pre-shared key, digital certificates, X.509 certificates, Firewall Pre-configured firewall rules can be enabled via WebUI, unlimited firewall configuration via CLI; DMZ; NAT; NAT-T, Attack prevention DDOS prevention (SYN flood protection, SSH attack prevention, HTTP/HTTPS attack prevention), port scan prevention (SYN-FIN, SYN-RST, X-mas, NULL flags, FIN scan attacks), VLAN Port and tag based VLAN separation, WEB filter Blacklist for blocking out unwanted websites, Whitelist for specifying allowed sites only, Access control Flexible access control of TCP, UDP, ICMP packets, MAC address filter, VPN OpenVPN Multiple clients and a server can run simultaneously, 12 encryption methods, OpenVPN Encryption DES-CBC, RC2-CBC, DES-EDE-CBC, DES-EDE3-CBC, DESX-CBC, BF-CBC, RC2-40-CBC, CAST5-CBC, RC2-64-CBC, AES-128-CBC, AES-192-CBC, AES-256-CBC, IPsec IKEv1, IKEv2, with 5 encryption methods for IPsec (DES, 3DES, AES128, AES192, AES256), GRE GRE tunnel, PPTP, L2TP Client/Server instances can run simultaneously, L2TPv3 support, Stunnel Proxy designed to add TLS encryption functionality to existing clients and servers without any changes in the program’s code, DMVPN Method of building scalable IPsec VPNs, SSTP SSTP client instance support, ZeroTier ZeroTier VPN client support, WireGuard WireGuard VPN client and server support, MODBUS MODBUS TCP SLAVE ID filtering Respond to one ID in range [1;255] or any, Allow remote access Allow access through WAN, Custom registers Modbus TCP custom register block, which allows to read/write to a file inside the router, and can be used to extend Modbus TCP slave functionality, MODBUS TCP MASTER Supported functions 01, 02, 03, 04, 05, 06, 15, 16, Supported data formats 8 bit: INT, UINT; 16 bit: INT, UINT (MSB or LSB first); 32 bit: float, INT, UINT (ABCD (big-endian), DCBA (little-endian), CDAB, BADC), HEX, ASCII, MQTT GATEWAY Gateway Allows sending commands and receiving data from Modbus Master trough MQTT broker, DATA TO SERVER Protocols HTTP(S), MQTT, Azure MQTT, Kinesis, MONITORING & MANAGEMENT WEB UI HTTP/HTTPS, status, configuration, FW update, CLI, troubleshoot, event log, system log, kernel log, FOTA Firmware update from server, automatic notification, SSH SSH (v1, v2), TR-069 OpenACS, EasyCwmp, ACSLite, tGem, LibreACS, GenieACS, FreeACS, LibCWMP, Friendly tech, AVSystem, MQTT MQTT Broker, MQTT publisher, SNMP SNMP (v1, v2, v3), SNMP trap, JSON-RPC Management API over HTTP/HTTPS, Modbus Modbus TCP status/control, RMS Teltonika Remote Management System (RMS), SYSTEM CHARACTERISTICS CPU Quad-core ARM Cortex A7, 717 MHz, RAM 256 MB, DDR3, FLASH storage 256 MB, SPI Flash, FIRMWARE / CONFIGURATION WEB UI Update FW from file, check FW on server, configuration profiles, configuration backup, FOTA Update FW/configuration from server, RMS Update FW/configuration for multiple devices at once, Keep settings Update FW without losing current configuration, FIRMWARE CUSTOMIZATION Operating system RutOS (OpenWrt based Linux OS), Supported languages Busybox shell, Lua, C, C++, Development tools SDK package with build environment provided, USB Data rate USB 2.0, Applications Samba share, USB-to-serial, External devices Possibility to connect external HDD, flash drive, additional modem, printer, Storage formats FAT, FAT32, NTFS, INPUT/OUTPUT Input 1 x Digital Input, 0 - 6 V detected as logic low, 8 - 30 V detected as logic high, Output 1 x Digital Output, Open collector output, max output 30 V, 300 mA, Events Email, RMS, POWER Connector 4 pin industrial DC power socket, Input voltage range 9 - 50 VDC, reverse polarity protection, voltage surge/transient protection, PoE (passive) Passive PoE. Possibility to power up through LAN port, not compatible with IEEE 802.3af, 802.3at and 802.3bt standards, Power consumption 6 W Max, PHYSICAL INTERFACES (PORTS, LEDS, BUTTONS) Ethernet 4 x RJ45 ports, 10/100/1000 Mbps, I/Os 1 x Digital Input, 1 x Digital Output on 4 pin power connector, Status LEDs 8 x LAN status LEDs, 1 x Power LED, Power 1 x 4 pin DC connector, USB 1 x USB A port for external devices, Reset 1 x Reboot/User default reset/Factory reset button, Other 1 x Grounding screw, PHYSICAL SPECIFICATION Casing material Aluminium housing with DIN tail mounting option, Dimensions (W x H x D) 115 x 32.2 x 95.2 mm, Weight 345 g, Mounting options DIN rail, flat surface placement, OPERATING ENVIRONMENT Operating temperature -40 C to 75 C, Operating humidity 10 % to 90 % non-condensing, Ingress Protection Rating IP30, REGULATORY & TYPE APPROVALS Regulatory & Type Approvals CE, RoHS, REACH, EMI IMMUNITY Standards EN 55032:2015, EN 55035:2017, ESD EN 61000-4-2:2009, RS EN 61000-4-3:2006+A1:2008+A2:2010, EFT EN 61000-4-4:2012, Surge protection EN 61000-4-5:2014, CS EN 61000-4-6:2014, DIP EN 61000-4-11:2004, SAFETY Standards IEC 62368-1:2014 EN 62368-1:2014+A11:2017, , RUTX08 TELTONIKA

RUTX08000000

Referencias específicas

Nuevo

Descargas

No customer reviews for the moment.

Arriba
Menú
Cerrar
Carrito
Cerrar
Volver
Cuenta
Cerrar