Our website uses cookies and other technologies to improve your experience.

close
g34960006700-carlo gavazzi
g34960006700-carlo gavazzi
Review:

Your inquiry has been sent successfully

There was an error sending your inquiry.

Check stock

G34960006700 Carlo Gavazzi

Plug-in Master Module; Interface for PLC Allen Bradley
€567.90 (Excl. VAT) €687.16 (inc. VAT)
Tax included
How many units do you want to buy?
Send your query!
G34960006700
CARLO GAVAZZI
Fieldbus CARLO GAVAZZI

Novaut is an authorized distributor for CARLO GAVAZZI.
New product
5-7 days
International deliveries
Quantity:
 Calculate Shipping Cost
Free Shipping
to Spain via Correos
Estimated delivery: No estimated delivery specified day(s)
Location: Warehouse 2

G34960006700, Plug-in Master Module Interface for PLC Allen Bradley Model G 3496 0006, G34960006700, The G 3495 0006 has been designed as an efficient solution for the interconnection of the Dupline® with Allen Bradley PLCs – SLC 500 series and Micrologix. It performs three functions: Dupline channel generator®, power synchronization (allows a 3-wire system with power) and RS 232 interface. , G34960006700, The Master Dupline module® (DMM) controls a 3-wire bus with signal, DC and common power. The DMM is connected to a standard DC power that synchronizes the signal from the Dupline carrier® before output the power signal. Synchronization is necessary so that the Dupline® and DC power can share the ground wire. The Master Dupline Module® is a Dupline Channel Generator® with the function of a Master. This means that the 128 I/O of the Dupline® will be read/written by the DMM and then sent to the PLC. The DMM can operate in two different modes – Normal Mode and Split I/O Mode. In "Normal" mode, the Dupline® operates as an equal-to-peer system in which the channel generator automatically establishes a connection between the Dupline inputs and outputs® encoded in the same Dupline® direction. For example, if an input encoded in B5 is activated, the output(s) encoded in B5 will also be activated. Consequently, a Dupline® output can be activated either through the output data received in the DMM or by an active input of the Dupline® encoded in the same Dupline® address. In "Split I/O" mode, the channel generator independently treats the inputs and outputs of the Dupline®. If an input encoded in B5 is activated, the DMM will provide the available information to the PLC (as in normal mode), but will not automatically activate the Dupline output(s® encoded in B5. Dupline® outputs are controlled exclusively through the output data received from the PLC. In this mode, 128 Dupline inputs and 128 outputs will be available®, since each input and each output encoded in the same Dupline address® will be able to operate independently.

G34960006700

Specific references

New product

Downloads

No customer reviews for the moment.

Up
Menu
Close
Shopping trolley
Close
Return
Account
Close